XF6 Series Installation and Programming Guide Digital Monitoring Products
35
Group Number
Enter a group number from 1 to 20. Up to 20 dierent groups may be assigned.
Group Name
The group name displays. To change the default name, press any select key or area then
enter up to 32 characters for the group name. Press CMD to enter the outputs to be
assigned to the group.
Output Number
Enter the Output number. Entry range is 1 to 6, 500-599, G01-G20 (outputs). The maximum
number of outputs that can be assigned to a specific group is eight.
An output group may be assigned as one of the output numbers in another output group.
See the XF6 Users Guide (LT-2792) Output Group section for additional information.
Output groups 1 to 20 are available for installation applications such as special lighting, etc.
ZONE INFORMATION
Zone Information
Zone Information allows you to define the operation of each protection zone used in the
system. All protection zones are programmed the same way.
Zone Number
Enter the number of the zone you intend to program. XF6-100 panels have onboard zones
GROUP NO: -
GROUP NAME X X
OUTPUT NO:
ZONE INFORMATION
ZONE NO: -
To Next Page
Loading...