Dobot CR A Series User Guide
Issue V1.3 (2023-09-14) User Guide Copyright © Yuejiang Technology Co., Ltd.
2
• Use over-stated specifications.
• Use as a climbing aid.
Safety warning signs
The following safety warning signs may appear in this document, and their meanings are
described as follows. The same safety warning signs are also used in the products.
Indicates a high degree of potential danger, which, if not avoided, will
result in death or serious injury.
May cause dangerous power consumption soon, which, if not avoided,
will cause personal injury or serious damage to the equipment.
May cause dangerous hot surfaces, which, if touched, may cause
personal injury.
Indicates a moderate or low potential hazard, which, if not avoided, may
cause minor personal injury and damage to the equipment.
Indicates a potential risk, which, if ignored, may result in damage to the
robot arm, loss of data or unpredictable results
A situation that, if not avoided, can cause personal injury or damage to
the equipment.
For items marked with such signs, depending on the specific situation,
there is sometimes a possibility of significant consequences
General safety
Follow the safety instructions below when starting and using the robot for the first time.
DANGER
The robot system is electrical equipment. Non-professional technicians should not
modify the circuit, otherwise, it may cause damage to devices or personal injury.
Comply with the local laws and regulations when operating the robot. The security
precautions in this document are only supplemental to the local laws and regulations.
Use the robot in the specified environment scope. Exceeding the specifications or
load conditions will shorten the service life of the robot, even damage it.
To Next Page
Loading...
