2
WN 059677 45532 - 11/2023
ES 250 PRO/ES 250 PRO FST
ES 400 PRO/ES 400 PRO FST
Mounting instructions
Contents
1 About this document 4
1.1 Contents and purpose 4
1.2 Target group 4
1.3 Other applicable documents 4
1.4 Documents storage 4
1.5 Abbreviations 4
1.6 Symbols used 5
2 Safety 6
2.1 Intended use 6
2.2 Improper use 6
2.3 Reasonably foreseeable misuse 6
2.4 Risk assessment 6
2.5 Basic warnings 6
3 Product description 7
3.1 Overview 7
3.2 Operating elements 8
3.3 Parts included 9
3.4 Technical data 9
3.5 Closing edge protection 9
3.6 Secondary closing edge protection 9
4 Mounting 10
4.1 Safety during mounting 10
4.2 Requirements for mounting 10
4.3 Mounting the operator 11
4.4 Mount the optional side panels 24
4.5 Mount the optional anti-static brushes 24
4.6 Mount the carriers 25
4.7 Hook in the door leaf 25
4.8 Mount the floor guides 26
4.9 Align the door leaves 27
4.10 Adjust the opening width 30
4.11 Mount the toothed belt engaging units 30
4.12 Mount the optional locking device 32
4.13 Mount the DRIVEUNIT 32
4.14 Mount the tensioning device 34
4.15 Cut the toothed belt to size 34
4.16 Mount the toothed belt 35
4.17 Adjust the tensioning device 38
4.18 Position the main closing edge 39
4.19 Mount the optional extension modules 39
4.20 Mount the cable ducts 40
4.21 Mount the cover holders 40
To Next Page
Loading...
