Dormakaba ES 250 PRO - Page 3

3
WN 059677 45532 - 11/2023
ES 250 PRO/ES 250 PRO FST
ES 400 PRO/ES 400 PRO FST
Mounting instructions
4.22 Prepare the internal cover 41
4.23 Mount the internal cover 42
4.24 Mount and connect the accessories 45
4.25 Position the sensors 46
5 CAN BUS system 48
5.1 CANBUS components 48
5.2 Properties of CANBUS systems 49
5.3 Structure of a CANBUS system 52
6 Terminal layout 54
6.1 Terminal layout of the control board 54
6.2 Multiports 54
6.3 Connection as an interlock 57
7 Commissioning 59
7.1 Requirements 59
7.2 Safety during commissioning 59
7.3 Commission the operator 59
8 Interlock mode 62
8.1 Interlock via EW I/O 62
8.2 Interlock with impulse transmission via EW I/O 62
8.3 Time interlock via EW I/O 63
8.4 Interlock pulse extension 63
9 Functional parameterization sticker 64
10 Fire protection function 65
10.1 Activate the fire protection function 65
11 Parameterization 66
11.1 Change parameters 66
11.2 Parameter overview 66
12 Information and error display 71
13 Replace the battery 78