Dover markem-image SmartDate X65 - Network Connectivity

Printer conguration
73 10099206-AA
Name: Ribbon Spacer Width
Range: 0 - 55
Default: 0
Used to enter an appropriate offset if ribbon spacers are used
Name: Ribbon Width
Default: 53mm (128mm)
Denes the ribbon width being used
Ribbon Monitoring
Tools > Settings > Printer > Ribbon > Ribbon Monitoring
Setting Description
Name: Low Ribbon Action
Default: Raise Warning
The action to take when a low ribbon is detected
Name: Low Ribbon Detect
Default: Yes
Enable/disable low ribbon detection
Name: Low Ribbon Size
Range: 10 - 100
Default: 50
The point at which low ribbon action is triggered
Name: Ribbon Break Detection
Default: Yes
Enables/disables ribbon break detection
 Network Connectivity
NGPCL
Refer to the NGPCL manual for detailed information.
Tools > Settings > External Interfaces > Network Connectivity > NGPCL
Setting Description
Name: NGPCL Checksum Enabled
Default: No
Enables/disables the checksum
Name: Field Name Length
Range: 0 - 100
Default: 0
The length of the eld name string
Name: Field Data Length
Range: 0 - 100
Default: 0
The length of the eld date string