Dover markem-image SmartDate X65 - Page 74

Printer conguration
74 10099206-AA
Name: NGPCL Success Field
Default: Yes
Controls the content of responses when using NGPCL
Serial
Tools > Settings > External Interfaces > Network Connectivity > Serial
Setting Description
Name: RS232 Char Set
Default: ASCII
Denes whether NGPCL commands are expected to be ASCII or
Unicode encoded
Name: Serial Port1 Baud Rate
Default: 19200
Denes the baud rate for the serial port
Name: Serial Port1 Function
Default: NGPCL
Denes the communication protocol for the serial port
Master/Slave
Tools > Settings > External Interfaces > Network Connectivity > Master Slave
Setting Description
Name: No. Of Slaves:
Range: 0 - 7
Default: 0
Denes the number of slave printers
Name: Slave 1: IP Address
Default: 010.000.000.016
Denes the IP Address of Slave printer 1
Name: Slave 2: IP Address
Default: 010.000.000.017
Denes the IP Address of Slave printer 2
Name: Slave 3: IP Address
Default: 010.000.000.018
Denes the IP Address of Slave printer 3
Name: Slave 4: IP Address
Default: 010.000.000.019
Denes the IP Address of Slave printer 4
Name: Slave 5: IP Address
Default: 010.000.000.020
Denes the IP Address of Slave printer 5
Name: Slave 6 IP Address
Default: 010.000.000.021
Denes the IP Address of Slave printer 6
Name: Slave 7: IP Address
Default: 010.000.000.022
Denes the IP Address of Slave printer 7
Name: Synchronise Image Files
Default: Disabled
Denes whether image les should be synchronised during
master/slave job selection