Preparation
38
Instructions for use D-Vapor/D-Vapor 3000
Before first use
Perform the following steps before using a
vaporizer for the first time:
– Check that the vaporizer, the power cable, and
the battery are not damaged.
– Have the battery fitted by maintenance
personnel
– Have the power cable connected by
maintenance personnel
Fitting the battery
1 Unscrew the baseplate (A) using a 2.5 mm
(0.1 in) screwdriver (B).
2 Connect the battery cable (C).
3 Insert the battery (D) in the battery
compartment.
WARNING
Risk of patient injury
If the battery is not present or is damaged, the
secondary alarm system will not be available.
Furthermore, emergency operation may be
partially or completely unavailable.
Only operate the vaporizer with a functioning
battery.
014
015016
To Next Page
Loading...
