DSE Model 5510 Autostart Control and Instrumentation System Operators Manual
057-015 5510 OPERATING MANUAL ISSUE 11 07/07/09 AM 55
9.3 ENGINE CONTROL UNIT INTERFACE
The module is capable of interfacing with the ECU fitted to electronically controlled engines.
Different manufacturers of engines utilise various different interfaces and protocols. As this is a
rapidly developing area, we recommend checking with DSE Support as to which engines are
currently supported.
The module will monitor the engines operating parameters such as engine speed, oil pressure,
engine temperature (among others) in order to closely monitor and control the engine. The data
gathered by the engine controller is transmitted via an industry standard communications interface.
This allows generator controllers such as the DSE 55xx range to access these engine parameters
with no physical connection to the sensor device.
Utilising the technology present on the engine in this way gives fewer connections to the engine,
higher reliability and better diagnosis of engine related problems.
NOTE:- For further details for connections to electronic engines refer to the manual
CAN and DSE Wiring. Part No. 057-004
To Next Page
Loading...
