10
Turning Power ON/OFF
When the screen shown at right is displayed, press
the PRINT key, then input ID and password.
(→P.11 “UID Control Function”)
ENTER ID AND
PASSWORD
Turning OFF Printer Power
Press the “O” side on the “power switch”.
The printer is turned off and the panel display goes
out.
Standard Mode
When the printer power is fi rst turned ON or the RESET key is pressed, the functions are reset
to standard mode. The standard mode settings are as follows:
100%
0
sht 1 set
When paper is loaded in the feed tray, the screen
shown at right is displayed.
• Print quantity : 0 • Document mode : TEXT
• Print position : Standard • Master size : DP-L200/A4, DP-L210/LG,
• Print speed : Speed 2 DP-L220/B4
• Zoom : 100% • Master darkness : NORMAL
• 2 IN 1 : OFF • ×94% : OFF
To Next Page
Loading...
Need help?
General