3
35
Printing With Useful Function
"2 IN 1" Layout
4. 2IN1
→ON OFF
Press the FUNCTION key.
The 2 IN 1 screen appears.
Press the
SELECT key (Left) to select “ON”.
Press the
FUNCTION key.
2 IN 1 mode is set.
Press the
SELECT key (Right) several times to
display the main screen.
Proceed with steps 1 to 5 of the sequence described
in “Basic Printing”.
(→P.21 “Basic Printing”)
Press the
FUNCTION key.
Press the
SELECT key (Right) several times to
show the screen at right.
How to Set 2 IN 1
4. 2IN1
OFF
To cancel 2 IN 1 mode, use one of the following
two methods:
● Set to “OFF” in the same procedure.
● Press the
RESET key. In this case, all
settings are reset to standard mode.
REFERENCE
100%
0
sht 1 set
4. 2IN1
ON
LQ
4. 2 IN 1
ON →OFF
To Next Page
Loading...
Need help?
General