Duplo DUPRINTER DP-L220 - When a Master Ejection Error Has Occurred

84
When a Master Ejection Error Has Occurred
When an old master remains on the drum, “MASTER EJECT MISS” is displayed on the LCD
panel. Remove it by following the procedure below.
Press the “ master ejection box open button” to open
the “master ejection box.”
Master ejection box open button
Press the “JOG switch” little by little to fi nd the edge of
the paper, then stop the drum at the position shown in
the fi gure.
MASTER EJECT MISS
● Do not press the surface of the drum unit with your fi ngers or scratch it.
Doing so will not only dirty your fingers or clothing but will also indent the drum unit
surface, preventing normal printing.
● Before placing the drum unit, check the location for other objects so that it is placed on a
level surface.
● Scratches or dents on the drum unit surface prevents normal printing.
IMPORTANT
● Do not touch the drum or rollers when you
operate the JOG switch.
● Do not put your hands inside the machine
while it is operating. Your hands may be
pulled in or caught.
WARNING