3
37
Printing With Useful Function
Adjusting Darkness
Press the SELECT key (Left) or SELECT
key (Right) to display the desired master darkness.
“LIGHT” → “NORMAL” → “DARK”
2.
MASTER DARKNESS
◄→ DARK
Press the FUNCTION key.
The master darkness is selected.
To reset to “NORMAL”, use one of the following
two methods:
● Set the darkness to “NORMAL” in the same
procedure.
● Press the
RESET key. In this case, all
settings are reset to standard mode.
REFERENCE
2.
MASTER DARKNESS
DARK
Press the SELECT key (Right) several times to
display the main screen.
100%
0
sht 1set
To Next Page
Loading...
Need help?
General