System enclosure: Stainless steel grade 304
Ink tank: Black HDPE
Solvent tank: Nature HDPE
Capacity
Ink tank: 1600ml approximately
Solvent tank: 1600ml approximately
Pressure
Pressure range: Up to 4.48 bar (65 p.s.i.) normal operating pressure
Maximum pressure: 6.2 bar (90 p.s.i.) maximum under fault conditions
Level Control
Ink tank sense low: Warning reported at approximately 400ml
Solvent tank sense low: Warning reported at approximately 400 ml
Performance
Solvent consumption: <10ml/h at 20 Celsius ambient using EC1240 MEK black ink
Memory Capacity
Message storage capacity: 2 areas, 32 messages each area
Logo storage capacity: Up to 100 logos
Chinese character: 12000 inside
Printhead
Types
Micro: 40 micron
Midi: 50 micron, 60 micron and 70 micron
Construction
Printhead: Polyformaldehyde(POM)
Cover: Stainless steel grade 304
Minimum Conduit bend radius: 230mm
Dimensions
Conduit length: 2m or 4m
Conduit diameter: 20mm
Print head dimensions： Diameter 42mm, length 243mm
Throw Distance (recommended)
Micro： 3.5mm
Midi： 10mm
To Next Page
Loading...