8.2. Replenishing Ink and Solvent
8.2.1. NOTE:
8.2.1.1. Please verify the consumable CSN before adding ink and solvent;
8.2.1.2. Check the ink or solvent specification are consistent with the using printer before
replenishing;
8.2.1.3. Only add ink or solvent when ink or solvent low warning;
8.2.1.4. Each add no more than 500ML.
8.2.2. EC2000 Consumable Verification
8.2.2.1. Put the ink or solvent bottle near the RFID reader and the label near the consumable
CSN reader during the first time using. After the machine reading the CSN, a dialog box
will showing CSN is correct on the screen.
To Next Page
Loading...