Edge-Core AS5610-52X Installation Guide

– 47 –
6 Switch Management
The switch includes a management agent that allows you to configure or monitor
the switch using its embedded management software. To manage the switch, you
can make a direct connection to the console port (out-of-band), or you can manage
it through a network connection (in-band) using Telnet, Secure Shell (SSH), a web
browser, or SNMP-based network management software.
The switch’s Management port (RJ-45) provides a dedicated management channel
that operates outside of the data transport network. This makes it possible to re-
configure or troubleshoot the switch over either a local or remote connection to
the Management port when access through the data channel is not possible or
deemed insecure.
For a detailed description of the switch’s software features, refer to the
Administrator’s Guide.
This chapter includes these sections:
◆ “Understanding the System Status LEDs” on page 48
◆ “How to Connect to the Management Port” on page 49
◆ “How to Connect to the Console Port” on page 50
◆ “How to Connect to the USB Port” on page 52
◆ “How to Reset the Switch” on page 53

Edge-Core AS5610-52X Specifications

Operating Environment

operating temperature	0° C to 40° C
storage temperature	-40° C to 70° C
operating humidity	5% to 95% (non-condensing)

Power

AC input voltage	100-240 VAC
AC input frequency	50-60 Hz
AC input current	6-3 A
DC output 5V	3 A
DC output 12V	33 A
power consumption	165 Watts maximum
maximum current at 100 VAC	6 A
maximum current at 240 VAC	3 A
power supply power	400 Watts @ 240V/100V per module

Weight and Dimensions

width	438.4 mm
depth	473 mm
height	43.4 mm
weight	8.395 kg
power supply width	54.5 mm
power supply depth	220 mm
power supply height	40.25 mm