Edge-Core AS5610-52X Installation Guide

Chapter 6 | Switch Management
How to Connect to the USB Port
– 52 –
2. Attach the RJ-45 end of the serial cable to the Console port on the switch.
3. Configure the PC’s COM port required settings using VT-100 terminal emulator
software (such as HyperTerminal) running on the management PC.
4. Log in to the command-line interface (CLI) using default settings:
■
User — admin
■
Password — null (there is no default password)
For a detailed description of connecting to the console and using the switch’s
command line interface (CLI), refer to the Administrator’s Guide.
How to Connect to the USB Port
The USB port on the switch front panel is for transferring configuration files from a
USB storage device to the switch’s flash memory.
Figure 30: USB Port
USB Port
1
1

Edge-Core AS5610-52X Specifications

Operating Environment

operating temperature	0° C to 40° C
storage temperature	-40° C to 70° C
operating humidity	5% to 95% (non-condensing)

Power

AC input voltage	100-240 VAC
AC input frequency	50-60 Hz
AC input current	6-3 A
DC output 5V	3 A
DC output 12V	33 A
power consumption	165 Watts maximum
maximum current at 100 VAC	6 A
maximum current at 240 VAC	3 A
power supply power	400 Watts @ 240V/100V per module

Weight and Dimensions

width	438.4 mm
depth	473 mm
height	43.4 mm
weight	8.395 kg
power supply width	54.5 mm
power supply depth	220 mm
power supply height	40.25 mm