Edge-Core AS5610-52X Installation Guide

Contents
– 6 –
5 Port Connections 33
Cable Labeling and Connection Records 34
Understanding the Port Status LEDs 35
How to Install an SFP/SFP+/QSFP+ Transceiver 36
How to Connect to the Twisted-Pair Copper Management Port 37
Copper Cabling Guidelines 38
1000BASE-T Pin Assignments 38
Connection Procedure 39
How to Connect to SFP/SFP+ Fiber Optic Ports 39
Connection Procedure 40
How to Connect to QSFP+ Fiber Optic Ports 42
Connection Procedure 42
DAC Connections 44
Making DAC Connections 44
6 Switch Management 47
Understanding the System Status LEDs 48
How to Connect to the Management Port 49
How to Connect to the Console Port 50
How to Connect to the USB Port 52
How to Reset the Switch 53
A Troubleshooting 54
Diagnosing LED Indicators 54
System Self-Diagnostic Test Failure 54
Power and Cooling Problems 55
Installation 55
In-Band Access 55
Index 56

Edge-Core AS5610-52X Specifications

Operating Environment

operating temperature	0° C to 40° C
storage temperature	-40° C to 70° C
operating humidity	5% to 95% (non-condensing)

Power

AC input voltage	100-240 VAC
AC input frequency	50-60 Hz
AC input current	6-3 A
DC output 5V	3 A
DC output 12V	33 A
power consumption	165 Watts maximum
maximum current at 100 VAC	6 A
maximum current at 240 VAC	3 A
power supply power	400 Watts @ 240V/100V per module

Weight and Dimensions

width	438.4 mm
depth	473 mm
height	43.4 mm
weight	8.395 kg
power supply width	54.5 mm
power supply depth	220 mm
power supply height	40.25 mm