Chapter 4
| System Management Commands
System Status
– 122 –
show tech-support This command displays a detailed list of system settings designed to help technical
support resolve configuration or functional problems.
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command generates a long list of information including detailed system and
interface settings. It is therefore advisable to direct the output to a file using any
suitable output capture function provided with your terminal emulation program.
Example
Console#show tech-support
show system:
System Description : AOS5700-54X
System OID String : 1.3.6.1.4.1.259.12.1.2
System Information
System Up Time: 0 days, 2 hours, 17 minutes, and 6.23 seconds
System Name: [NONE]
System Location: [NONE]
System Contact: [NONE]
MAC Address (Unit1): 00-12-CF-61-24-2F
Web Server: Enabled
Web Server Port: 80
Web Secure Server: Enabled
Web Secure Server Port: 443
Telnet Server: Enable
Telnet Server Port: 23
Jumbo Frame: Disabled
.
.
.
Jumbo Frame Shows if jumbo frames are enabled or disabled.
System Fan Shows if forced full-speed mode is enabled.
System Temperature Temperature at specified thermal detection point.
Main Power Status Displays the status of the internal power supply.
Redundant Power Status Displays the status of the redundant power supply.
(This switch does not support a redundant power supply.
Table 14: show system – display description (Continued)
Parameter Description
To Next Page
Loading...
Need help?
General