Chapter 24
| CFM Commands
Continuity Check Operations
– 705 –
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Use this command without any keywords to clear all entries in the CCM database.
Use the domain keyword to clear the CCM database for a specific domain, or the
level keyword to clear it for a specific maintenance level.
Example
Console#clear ethernet cfm maintenance-points remote domain voip
Console#
clear ethernet cfm
errors
This command clears continuity check errors logged for the specified maintenance
domain or maintenance level.
Syntax
clear ethernet cfm errors [domain domain-name | level level-id]
domain-name – Domain name. (Range: 1-43 alphanumeric characters)
level-id – Maintenance level. (Range: 0-7)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Use this command without any keywords to clear all entries in the error database.
Use the domain keyword to clear the error database for a specific domain, or the
level keyword to clear it for a specific maintenance level.
Example
Console#clear ethernet cfm errors domain voip
Console#
To Next Page
Loading...
Need help?
General