Edge-Core AS6700-32X - Show Ip Bgp Route-Map

Chapter 29 | IP Routing Commands
Border Gateway Protocol (BGPv4)
– 986 –
show ip bgp
route-map
This command shows routes matching the specified route map.
Syntax
show ip bgp route-map map-name
map-name – Name of the route map as defined by the route-map
command. The route map can be used to filter the networks to advertise.
(Range: 1-80 characters)
Command Mode
Privileged Exec
Example
Console#show ip bgp route-map rd
BGP table version is 0, local router ID is 192.168.0.2
Status codes: s suppressed, d damped, h history, * valid, > best, i internal,
r RIB-failure, S Stale, R Removed
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
* 100.1.1.0/24 10.1.1.64 0 0 500 100 600 ?
*> 10.1.1.68 0 0 300 ?
Console#
show ip bgp scan This command shows BGP scan status.
Syntax
show ip bgp scan
Command Mode
Privileged Exec
Example
Console#show ip bgp scan
BGP scan is running
BGP scan interval is 60
Current BGP nexthop cache:
10.10.10.64 valid [IGP metric 0]
BGP connected route:
10.10.10.0/24
10.10.11.0/24
Console#
show ip bgp summary This command shows summary information for all connections.
Syntax
show ip bgp summary