Edge-Core AS6700-32X - Show Ip Igmp Profile

Chapter 22 | Multicast Filtering Commands
IGMP Filtering and Throttling
– 615 –
Console#
show ip igmp profile This command displays IGMP filtering profiles created on the switch.
Syntax
show ip igmp profile [profile-number]
profile-number - An existing IGMP filter profile number.
(Range: 1-4294967295)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show ip igmp profile
IGMP Profile 19
IGMP Profile 50
Console#show ip igmp profile 19
IGMP Profile 19
Deny
Range 239.1.1.1 239.1.1.1
Range 239.2.3.1 239.2.3.100
Console#
show ip igmp
query-drop
This command shows if the specified interface is configured to drop IGMP query
packets.
Syntax
show ip igmp throttle interface [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-32/54)
port-channel channel-id (Range: 1-16/27)
Default Setting
None
Command Mode
Privileged Exec