6. PHYSICAL INSTALLATION
6.1 STORING THE INVERTER
If placing the inverter into storage before installation, keep the following factors in mind while
selecting a storage location.
CAUTION:
• The inverter and its components must be stored in its original packaging.
• The temperature for the storage area should be within -13 – 140°F (-25 –
60°C) and humidity within 0 – 85%.
• The packaging should be upright with a maximum of 7 stacked layers.
• Do not directly expose the inverter and its packaging to sunlight or rain and
keep away from corrosion.
To Next Page
Loading...
