AVN HYDRAULIK A-S
Flow regulator AM.3.QF
Dalager 1 DK-2605 Brøndby Fax 43 24 55 00 E-mail avn.hydraulik@avn.dk
Page
Suensonsvej 14 DK-8600 Silkeborg Fax 87 22 81 00 Internetadresse www.avn.dk
6.1.1
70 20 04 11
Aron
Data:
Max. Operating pressure 320 bar
Max. flow 20 l/min
Flow rate regulation 0-8 omgange
The standrad valve configuration allows ”meter in”
regulation, while it is possible to obtain ”meter out”
regulation by turning the valve by 180° along its lon-
gitudinal axis.
Order code:
AM
Modular valve
3
CETOP 3 / NG 6
*
Type of adjustment
M = plastic knob
C = Grub screw
**
00 = Standard
V1 = Viton seals
4
Serial no.
QF
Non compensated throttle valve
**
Control on lines
A / B / P / AB
Hydraulic symbol
AM.3.QF.A AM.3.QF.B AM.3.QF.P AM.3.QF.AB
A P T B A P T B A P T B A P T B
rev. 0