105
2. The light cover pulls straight off and the light bulb
pulls straight out.
Removing the oven door latch assembly:
1. Disconnect power and remove the air intake grill.
2. Disconnect the wiring from the phase switch, lock
switch and the latch motor.
3. Remove the (2) screws holding the latch
mechanism to the top of the oven and lift the
mechanism out.
Removing the pressure regulator access
panel:
1. Remove the (2) screws holding the pressure
regulator access panel to the back cover.
Removing the back cover:
1. Disconnect power from the range.
To Next Page
Loading...
