88
SECTION E - TEARDOWN
This section will describe how to remove components
from the range. Unless stated, the procedure will be
the same on all models. Unless stated, reverse the
procedure to reinstall the component.
Always remove electrical power from
the range when working in an area where electrical
power is present.
Always turn the gas off to the range
before opening any gas piping.
Note: Not all components are in all models.
Removing the top grates:
1. The top grates lift off.
Removing the burner caps:
1. Remove the top grates.
2. The burner caps lift off.
Removing the burner rings:
1. Remove the top grates and the burner caps.
2. The burner rings lift off.
Removing the burner head:
1. Remove the top grates, burner cap and ring.
To Next Page
Loading...
Need help?
General
