94
Removing electronic oven control board:
1.Disconnect power, remove the spill tray, left front and
rear center burner tube assemblies.
2. Remove the (8) screws holding the electronic oven
control board access panel to the burner box and
remove the panel.
3. Unplug the wiring harnesses and disconnect the
wiring from the electronic oven control board.
4. Remove the (4) screws (two on each side),
holding the electronic oven control board
mounting bracket to the top of the oven and lift the
bracket and control board out.
5. Release the electronic oven control board from
the mounting bracket by releasing the (10) plastic
rivets holding the board to the bracket.
Removing oven light transformer:
1. Disconnect power, remove the spill tray, right front
and front center burner tube assemblies.
2. Remove the (8) screws holding the transformer/oven
high temp limit access panel to the burner box and
remove the panel.
To Next Page
Loading...
