96
2. Remove the (2) screws holding the door handle to
the outer door liner.
Removing the oven door:
1. Rotate the hinge locks to the door so that when the
doors is closed they will take the spring pressure off
the hinges.
2. Close the door until you feel, the hinges released
from the rollers and then lift out on the door.
Removing the oven door seal:
1. Open the oven door.
2. The oven door seal is held to the inner liner of the
oven door by spring clips and can be pulled straight
off.
Removing the oven door inner liner
assembly:
1. Remove the oven door and place it on a soft
surface.
Note: To remove some of the screws in the
door, you will need a number 20 tora bit.
2. To remove the door inner liner assembly, from the
door outer liner assembly. Remove the (2) screws
on the bottom, one on each end, and the (2) screws
at the top of the inner liner. Then lift the inner liner
assembly out of the outer liner assembly.
To Next Page
Loading...
Need help?
General
