89
2. Using the burner tool, unscrew the brass ring
holding the burner head to the burner tube and lift
the burner out of the drip pan.
3. Unplug the igniter wire and lift the burner head,
and igniter off.
Removing the igniters:
1. Remove the burner head.
2. Remove the C clamp, holding the spring and
igniter to the burner head.
3. Lift the igniter out of the burner head.
Removing the knobs:
1. The shafts of the knobs are D shaped and the knobs
pull straight off.
To Next Page
Loading...
