Chapter 3 Installation and Wiring 19
Figure 3-10 Dimensions of Operation Keypad
Single edge
S
i
n
g
l
e
e
d
g
e
Figure 3-11 Installation dimensions of operation keypad
2. Notes in Installation
1) Do not connect the keypad cables alive.
2) The screws for fixing the cables is M3×6; its length must be shorter than
6mm to avoid short-circuit.
3.4.2 Installation of Status Display Unit
Status display unit is installed on the drive regardless of dimensions. The
installation is the same with that of the keypad.
TD3200 Variable Speed Drive for Elevator Door Control User Manual
To Next Page
Loading...
Need help?
General