Display codes for measurement units (continued)Table B-3:
Code Measurement unit
NM3/S Normal cubic meters per second
OHM Ohms
OUNCE Ounce
PA Pascals
PF Picofarads
PPM Parts per million
PRF/M Proof per mass
PRF/V Proof per volume
PSF Pounds per square foot
PSI Pounds per square inch gauge
PSI A Pounds per square inch absolute
SCF Standard cubic feet
SCFD Standard cubic feet per day
SCFH Standard cubic feet per hour
SCFM Standard cubic feet per minute
SCFS Standard cubic feet per second
SEC Seconds
SGU Specific gravity units
SL Standard liter
SL/D Standard liters per day
SL/H Standard liters per hour
SL/MIN Standard liters per minute
SL/S Standard liters per second
SM3 Standard cubic meter
SM3/D Standard cubic meters per day
SM3/H Standard cubic meters per hour
SM3/M Standard cubic meters per minute
SM3/S Standard cubic meters per second
SPECL Special
ST/CUY Short tons per cubic yard
ST/D Short tons per day
ST/H Short tons per hour
ST/MIN Short tons per minute
T Metric tons
T/D Metric tons per day
T/H Metric tons per hour
Using the transmitter display
Configuration and Use Manual 185
To Next Page
Loading...
