Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running
the motor
Optimization
NV Media Card
Operation
Onboard
PLC
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
Powerdrive F300 User Guide 165
Issue Number: 2
9.5 NV Media Card parameters
Table 9-2 Key to parameter table coding
This parameter shows the number of the data block last transferred from
a NV Media Card to the drive. If defaults are subsequently reloaded this
parameter is set to 0.
This parameter should have the data block number which the user would
like the information displayed in Pr 11.038, Pr 11.039 and Pr 11.040.
Displays the type/mode of the data block selected with Pr 11.037.
Displays the version number of the file selected in Pr 11.037.
Displays the checksum of the data block selected in Pr 11.037.
* Only a value of 3 or 4 in this parameter is saved.
If Pr 11.042 is equal to 1 or 2, this value is not transferred to the drive or
saved to the EEPROM. If Pr 11.042 is set to 3 or 4 the value is saved to
the EEPROM
None (0) = Inactive
Read (1) = Read parameter set from the NV Media Card
Program (2) = Program a parameter set to the NV Media Card
Auto (3) = Auto save
Boot (4) = Boot mode
If NV Media Card Create Special File (11.072) = 1 when a parameter file
is transferred to an NV media card the file is created as a macro file. NV
Media Card Create Special File (11.072) is reset to 0 after the file is
created or the transfer fails.
This will display the type of media card inserted; it will contain one of the
following values:
"None" (0) - No NV Media Card has been inserted.
"SMART Card" (1) - A SMARTCARD has been inserted.
"SD Card" (2) - A FAT formatted SD card has been inserted.
NV Media Card Read-only Flag (11.075) shows the state of the read-
only flag for the currently installed card.
RW Read / Write ND No default value
RO Read only NC Not copied
Num Number parameter PT Protected parameter
Bit Bit parameter RA Rating dependant
Txt Text string US User save
Bin Binary parameter PS Power-down save
FI Filtered DE Destination
11.036 {00.029} NV Media Card File Previously Loaded
RO Num NC PT
OL
Ú
0 to 999
Ö
0RFC-A
RFC-S
11.037 NV Media Card File Number
RW Num
OL
Ú
0 to 999
Ö
0RFC-A
RFC-S
11.038 NV Media Card File Type
RO Txt ND NC PT
OL
Ú
None (0), Open-loop (1),
RFC-A (2), RFC-S (3),
Regen (4), User Prog (5),
Option App (6)
Ö
RFC-A
RFC-S
Pr 11.038 String Type / mode
0 None No file selected
1 Open-loop Open-loop mode parameter file
2 RFC-A RFC-A mode parameter file
3 RFC-S RFC-S mode parameter file
4 Regen Regen mode parameter file
5 User Prog Onboard user program file
6 Option App Option module application file
11.039 NV Media Card File Version
RO Num ND NC PT
OL
Ú
0 to 9999
Ö
RFC-A
RFC-S
11.040 NV Media Card File Checksum
RO Num ND NC PT
OL
Ú
--2147483648 to
2147483647
Ö
RFC-A
RFC-S
11.042 Parameter Cloning
RW Txt NC US*
OL
Ú
None (0), Read (1),
Program (2), Auto (3),
Boot (4)
Ö
None (0)RFC-A
RFC-S
11.072 NV Media Card Create Special File
RW Num NC
OL
Ú
0 to 1
Ö
0RFC-A
RFC-S
11.073 NV Media Card Type
RO Txt ND NC PT
OL
Ú
None (0),
SMART Card (1),
SD Card (2)
Ö
RFC-A
RFC-S
11.075 NV Media Card Read-only Flag
RO Bit ND NC PT
OL
Ú
Off (0) or On (1)
Ö
RFC-A
RFC-S
To Next Page
Loading...
