Emerson Powerdrive F300 - Size 9 E and 10 E Power Connections; Size 11 E Power Connections

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running
the motor
Optimization
NV Media Card
Operation
Onboard
PLC
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
74 Powerdrive F300 User Guide
Issue Number: 2
Figure 4-7 Size 9E and 10E power connections
See Figure 4-12 for further information on ground connections.
Figure 4-8 Size 11E power connections
* Connect to either terminal.
A separate line reactor (INLXXX) of at least the value shown
in Table 4-3 and Table 4-2 on page 78 must be used with size
9E and10E. Failure to provide sufficient reactance could
damage or reduce the service life of the drive.
Supply connections
Mains
supply
L1 L2
Line reactor
Optional
EMC filter
Fuses
L3
L1 L2 L3
PE
Supply
ground
UVW
Motor
Optional ground
connection
Motor connections
9E
10E
CAUTION
Supply connections
Mains
Supply
L1 L2
Line reactor
Optional
EMC filter
Fuses
L3
Supply
ground
UVW
Motor
Optional ground
connection
Motor connections
PE
14
11E
L1 L1 L2
L2 L3 L3
*