Emerson Powerdrive F300 - Mounting Brackets

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running
the motor
Optimization
NV Media Card
Operation
Onboard
PLC
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
Powerdrive F300 User Guide 45
Issue Number: 2
3.5.3 Mounting brackets
Table 3-2 Mounting brackets (size 3 to 10)
Frame size Surface Qty Through-panel Qty
3 x 2
x 2
Hole size: 5.5 mm (0.22 in)
x 2
Inner hole size: 6.5 mm (0.26 in)
Outer hole size: 5.5 mm (0.22 in)
Inner hole size: 6.5 mm (0.26 in)
Outer hole size: 5.5 mm (0.22 in)
4 x 2
x 3
Hole size: 5.2 mm (0.21 in)
x 2
Hole size: 6.5 mm (0.26 in) Hole size: 6.5 mm (0.26 in)
5 x 2
x 2
Hole size: 5.2 mm (0.21 in)
x 2
Hole size: 6.5 mm (0.26 in) Hole size: 6.5 mm (0.26 in)
6 x 2
x 3
Hole size: 5.2 mm (0.21 in)
x 2
Hole size: 6.5 mm (0.26 in) Hole size: 6.5 mm (0.26 in)
7 x 2
x 2
Hole size: 9 mm (0.35 in)
x 2
Hole size: 9 mm (0.35 in) Hole size: 9 mm (0.35 in)
8 x 2
x 6
Hole size: 5.3 mm (0.21 in)
x 2
Hole size: 9 mm (0.35 in) Hole size: 9 mm (0.35 in)
9A,
9E and 10E
x 2
x 8
Hole size: 5.5 mm (0.22 in)
x 2
Hole size: 9 mm (0.35 in) Hole size: 9 mm (0.35 in)