Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running
the motor
Optimization
NV Media Card
Operation
Onboard
PLC
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
146 Powerdrive F300 User Guide
Issue Number: 2
7.4 Quick start commissioning / start-up using Powerdrive F300 Connect (V02.00.00.00
onwards)
Powerdrive F300 Connect is a Windows™ based software commissioning/start-up tool for Powerdrive F300. Powerdrive F300 Connect can be used
for commissioning / start-up and monitoring, drive parameters can be uploaded, downloaded and compared and simple or custom menu listings can
be created. Drive menus can be displayed in standard list format or as live block diagrams. Powerdrive F300 Connect is able to communicate with a
single drive or a network. Powerdrive F300 Connect can be downloaded from www.controltechniques.com (file size approximately 100 MB).
Powerdrive F300 Connect system requirements
• Windows 8, Windows 7 SP1, Windows Vista SP2, Windows XP SP3
• Minimum of 1280 x 1024 screen resolution with 256 colours
• Microsoft.Net Frameworks 4.0 (this is provided in the downloaded file)
• Note that you must have administrator rights to install Powerdrive F300 Connect
Any previous copy of Powerdrive F300 Connect should be uninstalled before proceeding with the installation (existing projects will not be lost).
Included within Powerdrive F300 Connect is the Parameter Reference Guide for Powerdrive F300.
7.4.1 Power-up the drive
1. Start Powerdrive F300 Connect, and on the ‘Project Management’ screen select 'Scan serial RTU network' or 'Scan all connected drives’.
To Next Page
Loading...
