Emerson Powerdrive F300 - Footprint Mounting the EMC Filter; Bookcase Mounting the EMC Filter; Size 7 to 10 Mounting of the EMC Filter; Size 3 External EMC Filter Dimensions

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running
the motor
Optimization
NV Media Card
Operation
Onboard
PLC
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
Powerdrive F300 User Guide 57
Issue Number: 2
The external EMC filters for sizes 0 to 6 can be footprint mounted or bookcase mounted as shown in Figure 3-46 and Figure 3-47. The external EMC
filters for sizes 7 to 10, are designed to be mounted above the drive as shown in Figure 3-48.
Mount the external EMC filter following the guidelines in section 4.10.6 Compliance with generic emission standards on page 94.
Figure 3-49 External EMC filter (size 3 to 6)
Table 3-12 Size 3 external EMC filter dimensions
Figure 3-46
Footprint mounting the EMC filter
Figure 3-47
Bookcase mounting the EMC filter
Figure 3-48
Size 7 to 10 mounting of the EMC filter
V: Ground stud X: Threaded holes for footprint mounting of the drive Y: Footprint mounting hole diameter
Z: Bookcase mounting slot diameter. CS: Cable size
CT part
number
ABCDEHWVXYZCS
4200-3230
384 mm
(15.12 in)
414 mm
(16.30 in)
56 mm
(2.21 in)
41 mm
(1.61 in)
426 mm
(16.77 in)
83 mm
(3.27 in)
M5 M5
5.5 mm
(0.22 in)
5.5 mm
(0.22 in)
2.5 mm
2
(14 AWG)
4200-3480
Y
ED
Z
L
1
'
L
2
'
L
3
'
X X
Y
V
Y
A
B
H
CW
Z
Z
CS
U1
V1 W1
Netz / Line
Last/Load
PE
U2
V2 W2