Emerson Powerdrive F300 - Line Reactor Mounting Dimensions for Size 9 E, 10 E and 11 E; Input Line Reactor for Size 9 and 10; Input Line Reactor Force Cooled; Input Line Reactor for Size 11

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running
the motor
Optimization
NV Media Card
Operation
Onboard
PLC
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
62 Powerdrive F300 User Guide
Issue Number: 2
3.11 Line reactor mounting dimensions for size 9E, 10E and 11E
Figure 3-54 Input line reactor (INLX0X) for size 9 and 10
Figure 3-55 Input line reactor force cooled (INLX0XW)
Figure 3-56 Input line reactor (INLX0X) for size 11
For overall dimensions and other details, refer to section 4.2.3 Input line reactor specification for size 9E, 10E and 11E on page 78.
187mm (7.36in)
∅ M8
130mm
(5.12in)
222 1mm (8.74 0.04in)±±
142 1mm (5.59 0.04in)±±
108 1mm
(4.25 0.04in)
±
±
7.5mm
(0.3in)
8.5 0.5mm
(0.17 0.02in)
±
±
110 mm (4.33 in)
144 mm (5.67 in)
Æ 9mmx5mm
between centres
(0.35 in x 0.20 in)