Emerson Powerdrive F300 - Option Module Identification; Keypad Identification; Additional Options

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running
the motor
Optimization
NV Media Card
Operation
Onboard
PLC
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
Powerdrive F300 User Guide 19
Issue Number: 2
All standard option modules are color-coded in order to make identification easy. All modules have an identification label on top of the module.
Standard option modules can be installed to any of the available option slots on the drive. The following tables shows the color-code key and gives
further details on their function.
Table 2-7 Keypad identification
Table 2-8 Additional options
Table 2-6 Option module identification
Type
Option
module
Color Name Further Details
Fieldbus
N/A KI-485 Adaptor
485 Comms Adaptor
485 Comms adaptor provides 485 communication interface. This adaptor
supports 115 k Baud, node addresses between 1 to 16 and 8 1 NP M serial
mode.
Purple SI-PROFIBUS
Profibus option
PROFIBUS adapter for communications with the drive
Medium Grey SI-DeviceNet
DeviceNet option
DeviceNet adapter for communications with the drive
Light Grey SI-CANopen
CANopen option
CANopen adapter for communications with the drive
Beige SI-Ethernet
External Ethernet module that supports EtherNet/IP, Modbus TCP/IP and
RTMoE. The module can be used to provide high speed drive access, global
connectivity and integration with IT network technologies, such as wireless
networking
Yellow Green
SI-PROFINET
SI-PROFINET V2
PROFINET option
PROFINET adapter for communications with the drive
Automation
(I/O expansion)
Orange SI-I/O
Extended I/O
Increases the I/O capability by adding the following combinations:
• Digital I/O
• Digital Inputs
• Analog Inputs (differential or single ended)
• Analog Output
• Relays
Type Keypad Name Further Details
Keypad KI-HOA Keypad RTC
LCD keypad option
Keypad with a LCD display and Hand / Off / Auto buttons and RTC
AUTO
Reset
HAND
OFF
Type Option Name Further Details
Back-up
SD Card Adaptor
SD Card Adaptor
Allows the drive to use an SD card for drive back-up
SMARTCARD
SMARTCARD
Used for parameter back-up with the drive
www.controltechniques.com