Emerson Powerdrive F300 - Surface Mounting the Size 4 Drive; Surface Mounting the Size 5 Drive

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running
the motor
Optimization
NV Media Card
Operation
Onboard
PLC
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
Powerdrive F300 User Guide 33
Issue Number: 2
Figure 3-16 Surface mounting the size 4 drive
The outer holes in the mounting bracket are to be used for surface mounting. See Table 3-2 for further information.
Figure 3-17 Surface mounting the size 5 drive
The outer holes in the mounting bracket are to be used for surface mounting. See Table 3-2 for further information.
Æ 6.5 mm
(0.26 in) x 4 holes
106 mm (4.17 in)
375 mm
(14.76 in)
8mm
(0.32 in)
53 mm
(2.09 in)
53 mm
(2.09 in)
124 mm (4.88 in)
391 mm (15.39 in)
365 mm (14.37 in)
200 mm (7.87 in)
9mm
(0.35 in)
NOTE
106 mm (4.17 in)
9mm
(0.35 in)
8mm
(0.32 in)
375 mm (14.76 in)
143 mm (5.63 in)
391 mm (15.39 in)
365 mm (14.37 in)
202 mm (7.95 in)
Æ 7.0 mm (0.28 in)
NOTE