Emerson Powerdrive F300 - Torque Settings

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running
the motor
Optimization
NV Media Card
Operation
Onboard
PLC
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
Powerdrive F300 User Guide 253
Issue Number: 2
12.1.25 Torque settings
Table 12-29 Drive control and relay terminal data
Table 12-30 Drive power terminal data
Table 12-31 Plug-in terminal block maximum cable sizes
Model Connection type Torque setting
All Plug-in terminal block 0.5 N m (0.4 lb ft)
Powerdrive
F300 frame
size
AC and motor terminals DC terminals Ground terminals
Recommended Maximum Recommended Maximum Recommended Maximum
3 and 4
Plug-in terminal block T20 Torx (M4) T20 Torx (M4) / M4 Nut (7 mm AF)
0.7 N m (0.5 lb ft) 0.8 N m (0.6 lb ft) 2.0 N m (1.4 Ib ft) 2.5 N m (1.8 Ib ft) 2.0 N m (1.4 Ib ft) 2.5 N m (1.8 Ib ft)
5
Plug-in terminal block T20 Torx (M4) / M4 Nut (7 mm AF) M5 Nut (8 mm AF)
1.5 N m (1.1 lb ft) 1.8 N m (1.3 lb ft) 1.5 N m (1.1 Ib ft) 2.5 N m (1.8 Ib ft) 2.0 N m (1.4 Ib ft) 5.0 N m (3.7 Ib ft)
6
M6 Nut (10 mm AF) M6 Nut (10 mm AF) M6 Nut (10 mm AF)
6.0 N m (4.4 Ib ft) 8.0 N m (6.0 Ib ft) 6.0 N m (4.4 Ib ft) 8.0 N m (6.0 Ib ft) 6.0 N m (4.4 Ib ft) 8.0 N m (6.0 Ib ft)
7
M8 Nut (13 mm AF) M8 Nut (13 mm AF) M8 Nut (13 mm AF)
12 N m (8.8 Ib ft) 14 N m (10.0 Ib ft) 12 N m (8.8 Ib ft) 14 N m (10.0 Ib ft) 12 N m (8.8 Ib ft) 14 N m (10.0 Ib ft)
8 to 11
M10 Nut (17 mm AF) M10 Nut (17 mm AF) M10 Nut (17 mm AF)
15 N m (11.1 Ib ft) 20 N m (14.8 Ib ft) 15 N m (11.1 Ib ft) 20 N m (14.8 Ib ft) 15 N m (11.1 Ib ft) 20 N m (14.8 Ib ft)
Model size Terminal block description Max cable size
All
11 way control connectors
1.5 mm
2
(16 AWG)
2 way relay connector
2.5 mm
2
(12 AWG)
3
6 way AC power connector
6 mm
2
(10 AWG)
4
5
3 way AC power connector
3 way motor connector
8 mm
2
(8 AWG)
6
2 way low voltage power
24 V supply connector
1.5 mm
2
(16 AWG)
7
8
9A/9E
10E/11E