Emerson Powerdrive F300 - Menu 29: Dyneo LSRPM Motor Configuration

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running
the motor
Optimization
NV Media Card
Operation
Onboard
PLC
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
Powerdrive F300 User Guide 231
Issue Number: 2
11.20 Menu 29: Dyneo LSRPM motor configuration
22.058 Parameter 00.058 Set-up
0.000 to 59.999
0.000 5.077
RW Num PT US
22.059 Parameter 00.059 Set-up 0.000 5.078
RW Num PT US
22.060 Parameter 00.060 Set-up 0.000 5.082
RW Num PT US
22.061 Parameter 00.061 Set-up 0.000 5.084
RW Num PT US
22.062 Parameter 00.062 Set-up
0.000
RW Num PT US
22.063 Parameter 00.063 Set-up
RW Num PT US
22.064 Parameter 00.064 Set-up
RW Num PT US
22.065 Parameter 00.065 Set-up
RW Num PT US
22.066 Parameter 00.066 Set-up
RW Num PT US
22.067 Parameter 00.067 Set-up
RW Num PT US
22.068 Parameter 00.068 Set-up
RW Num PT US
22.069 Parameter 00.069 Set-up
RW Num PT US
22.070 Parameter 00.070 Set-up
RW Num PT US
22.071 Parameter 00.071 Set-up
RW Num PT US
22.072 Parameter 00.072 Set-up
RW Num PT US
22.073 Parameter 00.073 Set-up
RW Num PT US
22.074 Parameter 00.074 Set-up
RW Num PT US
22.075 Parameter 00.075 Set-up
RW Num PT US
22.076 Parameter 00.076 Set-up
RW Num PT US
22.077 Parameter 00.077 Set-up
RW Num PT US
22.078 Parameter 00.078 Set-up
RW Num PT US
22.079 Parameter 00.079 Set-up
RW Num PT US
22.080 Parameter 00.080 Set-up
RW Num PT US
RW Read / Write RO Read only Num Number parameter Bit Bit parameter Txt Text string Bin Binary parameter FI Filtered
ND No default value NC Not copied PT Protected parameter RA Rating dependent US User save PS Power-down save DE Destination
Parameter
Range(
Ú) Default(Ö)
Type
OL RFC-A RFC-S OL RFC-A RFC-S
29.199
Low Speed Acceleration Ramp
Control Enable
Off (0) or On (1) Off (0) RW Num
29.200 LSRPM Motor Set-up Enable
Off (0) or On (1) On (1) RW BU
Parameter
Range(
Ú) Default(Ö)
Type
OL RFC-A RFC-S OL RFC-A RFC-S