Emerson Powerdrive F300 - Page 182

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running
the motor
Optimization
NV Media Card
Operation
Onboard
PLC
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
182 Powerdrive F300 User Guide
Issue Number: 2
Parameter
Range(
Ú)Default(Ö)
Type
OL RFC-A / S OL RFC-A RFC-S
01.001 Reference Selected ±VM_SPEED_FREQ_REF Hz ±VM_SPEED_FREQ_REF rpm RO Num ND NC PT
01.002 Pre-Skip Filter Reference ±VM_SPEED_FREQ_REF Hz ±VM_SPEED_FREQ_REF rpm RO Num ND NC PT
01.003 Pre-Ramp Reference ±VM_SPEED_FREQ_REF Hz ±VM_SPEED_FREQ_REF rpm RO Num ND NC PT
01.004 Reference Offset ±VM_SPEED_FREQ_REF Hz ±VM_SPEED_FREQ_REF rpm 0.0 RW Num US
01.006 Maximum Reference Clamp
±VM_POSITIVE_REF_
CLAMP1 Hz
±VM_POSITIVE_REF_
CLAMP1 rpm
50Hz: 50.0
60Hz: 60.0
50Hz: 1500.0
60Hz: 1800.0
RW Num US
01.007 Minimum Reference Clamp
±VM_NEGATIVE_REF_
CLAMP1
±VM_NEGATIVE_REF_
CLAMP1
0.0 RW Num US
01.008 Negative Reference Clamp Off (0) or On (1) Off (0) RW Bit US
01.009 Reference Offset Select Off (0) or On (1) Off (0) RW Bit US
01.010 Bipolar Reference Enable Off (0) or On (1) Off (0) RW Bit US
01.011 Reference On Off (0) or On (1) RO Bit ND NC PT
01.012 Reverse Select Off (0) or On (1) RO Bit ND NC PT
01.014 Reference Selector
A1 A2 (0), A1 Preset (1), A2 Preset (2)
Preset (3), Keypad (4), Precision (5)
Keypad Ref (6)
A1 A2 (0) RW Txt ND US
01.015 Preset Selector 0 to 9 0 RW Num US
01.016 Preset Selector Time 0.0 to 400.0 s 10.0 s RW Num US
01.017 Keypad Control Mode Reference ±VM_SPEED_FREQ_USER_REFS 0.0 RO Num NC PT PS
01.021 Preset Reference 1 ±VM_SPEED_FREQ_REF 0.0 RW Num US
01.022 Preset Reference 2 ±VM_SPEED_FREQ_REF 0.0 RW Num US
01.023 Preset Reference 3 ±VM_SPEED_FREQ_REF 0.0 RW Num US
01.024 Preset Reference 4 ±VM_SPEED_FREQ_REF 0.0 RW Num US
01.025 Preset Reference 5 ±VM_SPEED_FREQ_REF 0.0 RW Num US
01.026 Preset Reference 6 ±VM_SPEED_FREQ_REF 0.0 RW Num US
01.027 Preset Reference 7 ±VM_SPEED_FREQ_REF 0.0 RW Num US
01.028 Preset Reference 8 ±VM_SPEED_FREQ_REF 0.0 RW Num US
01.029 Skip Reference 1 0.0 to 550.0 Hz 0 to 33, 000 rpm 0.0 0 RW Num US
01.030 Skip Reference Band 1 0.0 to 25.0 Hz 0 to 250 rpm 0.0 0 RW Num US
01.031 Skip Reference 2 0.0 to 550.0 Hz 0 to 33, 000 rpm 0.0 0 RW Num US
01.032 Skip Reference Band 2 0.0 to 25.0 Hz 0 to 250 rpm 0.0 0 RW Num US
01.033 Skip Reference 3 0.0 to 550.0 Hz 0 to 33, 000 rpm 0.0 0 RW Num US
01.034 Skip Reference Band 3 0.0 to 25.0 Hz 0 to 250 rpm 0.0 0 RW Num US
01.035 Reference In Rejection Zone Off (0) or On (1) Off (0) or On (1) RO Bit ND NC PT
01.036 Analog Reference 1
±VM_SPEED_FREQ_USER_
REFS Hz
±VM_SPEED_FREQ_USER_
REFS rpm
0.0 RO Num NC
01.037 Analog Reference 2
±VM_SPEED_FREQ_USER_
REFS Hz
±VM_SPEED_FREQ_USER_
REFS rpm
0.0 RO Num NC
01.038 Percentage Trim ±100.00 % 0.00 % RW Num NC
01.039 Speed Feed-forwards ±VM_SPEED_FREQ_REF RO Num ND NC PT
01.040 Speed Feed-forwards Select Off (0) or On (1) RO Bit ND NC PT
01.041 Reference Select Flag 1 Off (0) or On (1) Off (0) RW Bit ND NC PT
01.042 Reference Select Flag 2 Off (0) or On (1) Off (0) RW Bit ND NC PT
01.043 Reference Select Flag 3 Off (0) or On (1) Off (0) RW Bit ND NC PT
01.044 Reference Select Flag 4 Off (0) or On (1) Off (0) RW Bit ND NC PT
01.045 Preset Select Flag 1 Off (0) or On (1) Off (0) RW Bit ND NC PT
01.046 Preset Select Flag 2 Off (0) or On (1) Off (0) RW Bit ND NC PT
01.047 Preset Select Flag 3 Off (0) or On (1) Off (0) RW Bit ND NC PT
01.048 Preset Selector Timer Reset Off (0) or On (1) Off (0) RW Bit ND NC PT
01.049 Reference Selected Indicator 1 to 6 RO Num ND NC PT
01.050 Preset Selected Indicator 1 to 8
RO Num ND NC PT
01.051
Power-up Keypad Control Mode
Reference
Reset (0), Last (1), Preset (2) Reset (0) RW Txt US
01.052 Hand / Off / Auto operating mode 0 to 3 1 RW Num US
01.053 Fire mode reference ±VM_SPEED_FREQ_REF 0.0 RW Num US
01.054 Fire mode activate Off (0) or On (1) Off (0) RO Bit NC
RW Read / Write RO Read only Num Number parameter Bit Bit parameter Txt Text string Bin Binary parameter FI Filtered
ND No default value NC Not copied PT Protected parameter RA Rating dependent US User save PS Power-down save DE Destination