Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running
the motor
Optimization
NV Media Card
Operation
Onboard
PLC
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
Powerdrive F300 User Guide 219
Issue Number: 2
11.071 Number Of Power Modules Detected 0 to 20 RO Num ND NC PT US
11.072 NV Media Card Create Special File 0 to 1 0 RW Num NC
11.073 NV Media Card Size None (0), SMART Card (1), SD Card (2) RO Num ND NC PT
11.075 NV Media Card Read-only Flag Off (0) or On (1) RO Bit ND NC PT
11.076 NV Media Card Warning Suppression Flag Off (0) or On (1) RO Bit ND NC PT
11.077 NV Media Card File Required Version 0 to 9999 RW Num ND NC PT
11.079 Drive Name Characters 1-4 (-2147483648) to (2147483647) (0) RW Chr PT US
11.080 Drive Name Characters 5-8 (-2147483648) to (2147483647) (0) RW Chr PT US
11.081 Drive Name Characters 9-12 (-2147483648) to (2147483647) (0) RW Chr PT US
11.082 Drive Name Characters 13-16 (-2147483648) to (2147483647) (0) RW Chr PT US
11.084 Drive Mode Open-loop (1), RFC-A (2), RFC-S (3) RO Txt ND NC PT US
11.085 Security Status
None (0), Read-only (1), Status-only (2),
No Access (3)
RO Txt ND NC PT PS
11.086 Menu Access Status Menu 0 (0) or All Menus (1) RO Txt ND NC PT PS
11.090 Keypad Port Serial Address 1 to16 1 RW Num US
11.091 Product Identifier Characters 1 (-2147483648) to (2147483647) RO Chr ND NC PT
11.092 Product Identifier Characters 2 (-2147483648) to (2147483647) RO Chr ND NC PT
11.093 Product Identifier Characters 3 (-2147483648) to (2147483647) RO Chr ND NC PT
RW Read / Write RO Read only Num Number parameter Bit Bit parameter Txt Text string Bin Binary parameter FI Filtered
ND No default value NC Not copied PT Protected parameter RA Rating dependent US User save PS Power-down save DE Destination
IP IP address Mac Mac address Date Date parameter Time Time parameter SMP Slot,menu,parameter Chr Character parameter Ver Version number
Parameter
Range(
Ú) Default(Ö)
Type
OL RFC-A / S OL RFC-A RFC-S