Emerson Powerdrive F300 - Page 227

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running
the motor
Optimization
NV Media Card
Operation
Onboard
PLC
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
Powerdrive F300 User Guide 227
Issue Number: 2
14.059 PID1 Mode Selector
Fbk1 (0), Fbk2 (1),
Fbk1 + Fbk2 (2), Min Fbk (3),
Max Fbk (4), Av Fbk (5),
Min Error (6), Max Error (7)
Fbk1 (0) RW Txt US
14.060 PID1 Feedback Square Root Enable 1 Off (0) or On (1) Off (0) RW Bit US
14.061 PID2 Feedback Square Root Enable Off (0) or On (1) Off (0) RW Bit US
14.062 PID1 Feedback Square Root Enable 2 Off (0) or On (1) Off (0) RW Bit US
Parameter
Range
(Ú) Default(Ö)
Type
Open-Loop RFC-A / S Open-Loop RFC-A RFC-S
RW Read / Write RO Read only Num Number parameter Bit Bit parameter Txt Text string Bin Binary parameter FI Filtered
ND No default value NC Not copied PT Protected parameter RA Rating dependent US User save PS Power-down save DE Destination