Powerdrive F300 User Guide 7
Issue Number: 2
Declaration of Conformity (including 2006 Machinery Directive)
This declaration applies to the Powerdrive F300 variable speed drive
product range, comprising model numbers composed as shown below:
This declaration relates to these products when used as a safety
component of a machine. Only the Safe Torque Off function may be
used for a safety function of a machine. None of the other functions
of the drive may be used to carry out a safety function.
These products fulfil all the relevant provisions of Directives 2006/42/EC
(The Machinery Directive) and 2004/108/EC (The EMC Directive).
EC type-examination has been carried out by the following notified body:
TÜV Rheinland Industrie Service GmbH
Am Grauen Stein
D-51105 K
Öln
Notified Body identification number: 0035
EC type-examination certificate number: 01/205/5270/14
The harmonized standards used are shown below:
Person authorised to compile the technical file:
C Hargis
Chief Engineer
Newtown, Powys. UK
IMPORTANT NOTICE
These drive products are intended to be used with appropriate
motors, sensors, electrical protection components and other
equipment to form complete systems. It is the responsibility of the
installer to ensure that the design of the complete machine,
including its safety-related control system, is carried out in
accordance with the requirements of the Machinery Directive and
any other relevant legislation. The use of a safety-related drive in
itself does not ensure the safety of the machine.
Compliance with safety and EMC regulations depends upon
installing and configuring inverters correctly. The inverters must be
installed only by professional assemblers who are familiar with
requirements for safety and EMC. The assembler is responsible for
ensuring that the end product or system complies with all the
relevant laws in the country where it is to be used. Refer to the User
Guide.
Control Techniques Ltd
The Gro
Newtown
Powys
UK
SY16 3BE
Moteurs Leroy-Somer
Usine des Agriers
Boulevard Marcellin Leroy
CS10015
16915 Angoulême Cedex 9
France
Faaa-bbbbbbbbb Valid characters:
aaa 300
bbbbbbbbb
03200066A, 03200080A, 03200110A,
03200127A, 03400034A, 03400045A,
03400062A, 03400077A, 03400104A,
03400123A
04200180A, 04200250A, 04400185,
04400240A
05200300A, 05400300A,
05500039A, 05500061A, 05500100A
06200500A, 06200580A, 06400380A,
06400480A, 06400630A, 06500120A,
06500170A, 06500220A, 06500270A,
06500340A, 06500430A
07200750A, 07200940A, 07201170A,
07400790A, 07400940A, 07401120A,
07500530A, 07500730A, 07600230A,
07600300A, 07600360A, 07600460A,
07600520A, 07600730A
082001490A, 08201800A, 08401550A,
08401840A, 08500860A, 08501080A,
08600860A, 08601080A
09202160A, 09202660A, 09402210A,
09402660A, 09501250A, 09501500A,
09601250A, 09601550A
09202160E, 09202660E, 09402210E,
09402660E, 09501250E, 09501500E,
09601250E, 09601550E
10203250E, 10203600E, 10403200E,
10403610E, 10502000E, 10601720E,
10601970E
11404370E, 11404870E, 11405070E,
11502480E, 11502880E, 11503150E,
11602250E, 11602750E, 11603050E
EN 61800-5-1:2007
Adjustable speed electrical power drive
systems. Safety requirements. Electrical,
thermal and energy
EN 61800-5-2:2007
Adjustable speed electrical power drive
systems. Safety requirements. Functional
EN ISO 13849-1:2008
Safety of machinery. Safety-related parts of
control systems. General principles for
design
EN ISO 13849-2:2008
Safety of machinery. Safety-related parts of
control systems. Validation
EN 61800-3:2004
Adjustable speed electrical power drive
systems. EMC requirements and specific test
methods
EN 62061:2005
Safety of machinery. Functional safety of
safety related electrical, electronic and
programmable electronic control systems
G.Wiiliams
VP Technology
Date: 13th July 2015
Place: Newtown, Powys. UK
To Next Page
Loading...
