Emerson Unidrive M702 - Page 188

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running
the motor
Optimization
NV Media Card
Operation
Onboard
PLC
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
188 Unidrive M702 User Guide
Issue Number: 3
Parameter
Range(
) Default()
Type
OL RFC-A / S OL RFC-A RFC-S
09.001 Logic Function 1 Output Off (0) or On (1) RO Bit ND NC PT
09.002 Logic Function 2 Output Off (0) or On (1) RO Bit ND NC PT
09.003 Motorized Pot Output ±100.00 % RO Num ND NC PT PS
09.004 Logic Function 1 Source 1 0.000 to 59.999 0.000 RW Num PT US
09.005 Logic Function 1 Source 1 Invert Off (0) or On (1) Off (0) RW Bit US
09.006 Logic Function 1 Source 2 0.000 to 59.999 0.000 RW Num PT US
09.007 Logic Function 1 Source 2 Invert Off (0) or On (1) Off (0) RW Bit US
09.008 Logic Function 1 Output Invert Off (0) or On (1) Off (0) RW Bit US
09.009 Logic Function 1 Delay ±25.0 s 0.0s RW Num US
09.010 Logic Function 1 Destination 0.000 to 59.999 0.000 RW Num DE PT US
09.014 Logic Function 2 Source 1 0.000 to 59.999 0.000 RW Num PT US
09.015 Logic Function 2 Source 1 Invert Off (0) or On (1) Off (0) RW Bit US
09.016 Logic Function 2 Source 2 0.000 to 59.999 0.000 RW Num PT US
09.017 Logic Function 2 Source 2 Invert Off (0) or On (1) Off (0) RW Bit US
09.018 Logic Function 2 Output Invert Off (0) or On (1) Off (0) RW Bit US
09.019 Logic Function 2 Delay ±25.0 s 0.0 s RW Num US
09.020 Logic Function 2 Destination 0.000 to 59.999 0.000 RW Num DE PT US
09.021 Motorized Pot Mode 0 to 4 0 RW Num US
09.022 Motorized Pot Bipolar Select Off (0) or On (1) Off (0) RW Bit US
09.023 Motorized Pot Rate 0 to 250 s 20 s RW Num US
09.024 Motorized Pot Scaling 0.000 to 4.000 1.000 RW Num US
09.025 Motorized Pot Destination 0.000 to 59.999 0.000 RW Num DE PT US
09.026 Motorized Pot Up Off (0) or On (1) Off (0) RW Bit NC
09.027 Motorized Pot Down Off (0) or On (1) Off (0) RW Bit NC
09.028 Motorized Pot Reset Off (0) or On (1) Off (0) RW Bit NC
09.029 Binary Sum Ones Off (0) or On (1) Off (0) RW Bit NC
09.030 Binary Sum Twos Off (0) or On (1) Off (0) RW Bit NC
09.031 Binary Sum Fours Off (0) or On (1) Off (0) RW Bit NC
09.032 Binary Sum Output 0 to 255 RO Num ND NC PT
09.033 Binary Sum Destination 0.000 to 59.999 0.000 RW Num DE PT US
09.034 Binary Sum Offset 0 to 248 0 RW Num US
09.035 Timer 1 Start Date 00-00-00 to 31-12-99 00-00-00 RW Date US
09.036 Timer 1 Start Time 00:00:00 to 23:59:59 00:00:00 RW Time US
09.037 Timer 1 Stop Date 00-00-00 to 31-12-99 00-00-00 RW Date US
09.038 Timer 1 Stop Time 00:00:00 to 23:59:59 00:00:00 RW Time US
09.039 Timer 1 Repeat Function
None (0), Hour (1), Day (2), Week (3), Month (4), Year (5),
One off (6), Minute (7)
None (0) RW Txt US
09.040 Timer 1 Enable Off (0) or On (1) Off (0) RW Bit US
09.041 Timer 1 Invert Off (0) or On (1) Off (0) RW Bit US
09.042 Timer 1 Output Off (0) or On (1)
RO Bit ND NC PT
09.043 Timer 1 Destination 0.000 to 59.999 0.000 RW DE PT US
09.045 Timer 2 Start Date 00-00-00 to 31-12-99 0 RW Date US
09.046 Timer 2 Start Time 00:00:00 to 23:59:59 0 RW Time US
09.047 Timer 2 Stop Date 00-00-00 to 31-12-99 0 RW Date US
09.048 Timer 2 Stop Time 00:00:00 to 23:59:59 0 RW Time US
09.049 Timer 2 Repeat Function
None (0), Hour (1), Day (2), Week (3), Month (4), Year (5),
One off (6), Minute (7)
None (0) RW Txt US
09.050 Timer 2 Enable Off (0) or On (1) Off (0) RW Bit US
09.051 Timer 2 Invert Off (0) or On (1) Off (0) RW Bit US
09.052 Timer 2 Output Off (0) or On (1)
RO Bit ND NC PT
09.053 Timer 2 Destination 0.000 to 59.999 0.000 RW DE PT US
09.055 Scope Trace 1 Source 0.000 to 59.999 0.000 RW Num PT US
09.056 Scope Trace 2 Source 0.000 to 59.999 0.000 RW Num PT US
09.057 Scope Trace 3 Source 0.000 to 59.999 0.000 RW Num PT US
09.058 Scope Trace 4 Source 0.000 to 59.999 0.000 RW Num PT US
09.059 Scope Trigger Off (0) or On (1) Off (0) RW Bit