Emerson Unidrive M702 - Page 189

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running
the motor
Optimization
NV Media Card
Operation
Onboard
PLC
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
Unidrive M702 User Guide 189
Issue Number: 3
09.060 Scope Trigger Source 0.000 to 59.999 0.000 RW Num PT US
09.061 Scope Trigger Threshold -2147483648 to 2147483647 0 RW Num US
09.062 Scope Trigger Invert Off (0) or On (1) Off (0) RW Bit US
09.063 Scope Mode Single (0), Normal (1), Auto (2) Single (0) RW Txt US
09.064 Scope Arm Off (0) or On (1) Off (0) RW Bit NC
09.065 Scope Data Not Ready Off (0) or On (1) RO Bit ND NC PT
09.066 Scope Saving Data Off (0) or On (1) RO Bit ND NC PT
09.067 Scope Sample Time 1 to 200 1 RW Num US
09.068 Scope Trigger Delay 0 to 100 % 0 % RW Num US
09.069 Scope Time Period 0.00 to 200000.00 ms
RO Num ND NC PT
09.070 Scope Auto-save Mode Disabled (0), Overwrite (1), Keep (2) Disabled (0) RW Txt US
09.071 Scope Auto-save File Number 0 to 99 0 RO Num PS
09.072 Scope Auto-save Reset Off (0) or On (1) Off (0) RW Bit
09.073 Scope Auto-save Status Disabled (0), Active (1), Stopped (2), Failed (3) Disabled (0) RO Txt PS
RW Read / Write RO Read only Num Number parameter Bit Bit parameter Txt Text string Bin Binary parameter FI Filtered
ND No default value NC Not copied PT Protected parameter RA Rating dependent US User save PS Power-down save DE Destination
Parameter
Range(
)Default()
Type
OL RFC-A / S OL RFC-A RFC-S