Emotron VFX 2.1 User Manual

CG Drives & Automation 01-7492-01r1 Installation 45
** Valid when brake chopper electronics are built in.
***** XX=20 or 54, module IP-class.
69-250-54
H69 (2x) 25 - 240
31 (for
25-34 mm
2
)
42 (for
35-152 mm
2
)
56 (for
153-240
mm
2
)
(2x) 25 - 240
31 (for
25-34 mm
2
)
42 (for
35-152 mm
2
)
56 (for
153-240 mm
2
)
PE/Earth via mounting
screws/mounting frame.
In order to secure proper
earthing, always use all
mounting screws and
tighten them thoroughly.
Copper
(Cu)/
Aluminum
(Al)
75°C
69-300-54
69-375-54
69-400-54
69-430-54
I69 (3x) 25 - 240 (3x) 25 - 24069-500-54
69-595-54
69-650-54
J69 (4x) 25 - 240 (4x) 25 - 24069-720-54
69-800-54
69-905-54
KA69 (5x) 25 - 240 (5x) 25 - 240
69-995-54
69-1k2-54 K69 (6x) 25 - 240 (6x) 25 - 240
69-1k4-54 L69 (7x) 25 - 240 (7x) 25 - 240
69-1k6-54 M69 (8x) 25 - 240 (8x) 25 - 240
69-1k8-54 N69 (9x) 25 - 240 (9x) 25 - 240
69-2k0-54 O69 (10x) 25 - 240 (10x) 25 - 240
69-2k2-54 P69 (11x) 25 - 240 (11x) 25 - 240
69-2k4-54 Q69 (12x) 25 - 240 (12x) 25 - 240
69-2k6-54 R69 (13x) 25 - 240 (13x) 25 - 240
69-2k8-54 S69 (14x) 25 - 240 (14x) 25 - 240
69-3k0-54 T69 (15x) 25 - 240 (15x) 25 - 240
Table 19 Cable connector range and tightening torque for Emotron VFX69, according to IEC ratings

Emotron VFX 2.1 Specifications

General

Brand	Emotron
Model	VFX 2.1
Category	DC Drives
Language	English