8Introduction CG Drives & Automation 01-7492-01r1
1.3 Warranty
The warranty applies when the equipment is installed,
operated and maintained according to instructions in this
instruction manual. Duration of warranty as per contract.
Faults that arise due to faulty installation or operation are
not covered by the warranty.
1.4 Type code number
Fig. 1 gives an example of the type code numbering used on
all AC drives
. With this code number the exact type of the
drive can be determined. This identification will be required
for type specific information when mounting and installing.
The code number is located on the product label, on the
unit.
New type code for all FDU/VFX drive sizes (002-3K0),
valid from 2021-01-01(serial no from:
PPPPRR2101SSSS*).
Fig. 1 Type code number
Type code
VFX 48 -017 -20 C E – – – A – N N N N A N – – A
Position No
1 2 3 4 5 6 7 8 9 1011121314151617181920
Position
for 002-3K0
Configuration
1 AC drive type
VFX
2 Supply voltage
48=480 V mains
52=525 V mains
69=690 V mains
3 Rated current (A) continuous
-002=2.0 A
-
-3K0=3000 A
4 Protection class
20=IP20 - Intended for mounting inside a cabinet
21=IP21 - Intended for wall-mounting
54=IP54 - Intended for wall-mounting
5 Control panel
–=Blank panel
D=4-line Control panel, standard IP2X/54
E=4-line Control panel with Bluetooth (option IP2X/54)
F=4-line Control panel with WiFi (option IP2X/54)
6 EMC option
E=Standard EMC (Category C3)
F=Extended EMC (Category C2)
I=IT-Net
7 Brake chopper option
–=No chopper
B=Chopper built in
D=DC+/- interface
8 Stand-by power supply option
–=No SBS (24V input included in Control board 2.1)
S=SBS included (code not used with Control board 2.1)
9 Safe Torque Off option
–=No Safe Torque Off
O=Safe Torque Off included
10 Brand label A=Standard
11 Coated boards, option
–=Standard, not coated boards IP54
V=Coated boards, option IP54 (standard IP2X)
To Next Page
Loading...
Need help?
General
