Emotron VFX 2.1 User Manual

CG Drives & Automation 01-7492-01r1 Installation 47
48-205-20
F2
4 - 500 kcmil
275 (for
AWG 4 - 2)
375 (for AWG
1 -300 kcmil)
500 (for AWG
350 -500
kcmil)
6 - 300 kcmil
275 (for
AWG 6 - 2)
375 (for AWG
1 -300Kcmil)
4 - 500 kcmil
6 - 2/0**
275 (for
AWG 4 -
2)
375 (for
AWG 1 -
300 kcmil)
500 (for
AWG 350
-500
kcmil)
88**
Copper
(Cu)
75°C
48-244-20
48-293-20
48-210-54
F
48-250-54
48-295-54 ***
48-365-20 FA2
M10 connection 416 M8 connection 212
M8
connection
212
Copper
(Cu)
75°C
48-365-54 FA
48-430-20
H (2x) 4 - 500 kcmil
275 (for
AWG 4 - 2)
375 (for
AWG 1 - 300
kcmil)
500 (for AWG
350 -500
kcmil)
(2x) 4 - 500 kcmil
275 (for
AWG 4 - 2)
375 (for
AWG 1 -300
kcmil)
500 (for AWG
350 -500
kcmil)
For connecting PE/Earth
cables, use M8 grounding
bolts in the lower back
part of the drive module
mounting frame.
Tightening torque =
212 Lb-In.
Copper
(Cu)
75°C
48-500-20
48-590-20 G2
M10 connection 416 M10 connection 416
For connecting PE/Earth
cables, use M8 grounding
bolts in the lower back
part of the drive module
mounting frame.
Tightening torque =
212 Lb-In.
Copper
(Cu)
75°C
48-660-20 H2
48-730-20 H2
48-810-20 G3
48-885-20 G3
48-1010-
20
H3
48-1100-
20
H3
48-1300-
20
H4
48-1460-
20
H4
48-1710-
20
H5
48-1820-
20
H5
Table 20 Cable connector range and tightening torque for Emotron VFX48 and VFX52, according to NEMA ratings
Model VFX
Frame
size
Cable cross section connector range
Cable
type
Mains and motor Brake PE
Cable range
AWG
Tightening
torque
Lb-In
Cable range
AWG
Tightening
torque
Lb-In
Cable range
AWG
Tightening
torque
Lb-In

Emotron VFX 2.1 Specifications

General

Brand	Emotron
Model	VFX 2.1
Category	DC Drives
Language	English