Warning!
It is possible to mount the Mercury ZX1 SoC module the wrong way round on the base board - always
check that the mounting holes on the base board are aligned with the mounting holes of the Mercury
ZX1 SoC module.
The base board and module may be damaged if the module is mounted the wrong way round and
powered up.
1.1.6 Electrostatic Discharge
Electronic boards are sensitive to electrostatic discharge (ESD). Please ensure that the product is handled
with care and only in an ESD-protected environment.
1.1.7 Electromagnetic Compatibility
The Mercury ZX1 SoC module is a Class A product and is not intended for use in domestic environments.
The product may cause electromagnetic interference, for which appropriate measures must be taken.
1.2 Features
• Xilinx Zynq®-7030/7035/7045 All Programmable SoC, FBG676/FFG676 package
• Dual ARM® Cortex™-A9 MPCore™with CoreSight™ and NEON™ extension
• Xilinx Kintex-7 28 nm FPGA fabric
• Zynq-7030: 170 user I/Os
• 12 ARM peripheral I/Os (SPI, SDIO, CAN, I2C, UART) shared with FPGA I/Os
• 138 FPGA I/Os (single-ended or differential)
• 66 FPGA I/Os up to 3.3 V
• 84 FPGA I/Os up to 1.8 V
• 20 MGT signals (clock and data)
• Zynq-7035/7045: 178 user I/Os
• 12 ARM peripheral I/Os (SPI, SDIO, CAN, I2C, UART) shared with FPGA I/Os
• 126 FPGA I/Os (single-ended or differential)
• 66 FPGA I/Os up to 3.3 V
• 72 FPGA I/Os up to 1.8 V
• 40 MGT signals (clock and data)
• Zynq-7030: 4 MGTs @ 6.6 Gbit/sec and 2 reference input clock differential pairs
• Zynq-7035: 8 MGTs @ 6.6 Gbit/sec and 4 reference input clock differential pairs
• Zynq-7045: 8 MGTs @ 10.3125 Gbit/sec and 4 reference input clock differential pairs
• PCIe Gen2 ×4/×8 (Xilinx integrated PCIe block)
• 1 GB DDR3 SDRAM connected to the Processing System (PS)
• 256 MB DDR3 SDRAM connected to the Programmable Logic (PL)
• 512 MB NAND flash
• 64 MB quad SPI flash
• Gigabit Ethernet
• Dual Fast Ethernet
• USB 2.0 On-The-Go (OTG)
• Real-time clock
• 5 to 15 V supply voltage
D-0000-403-002 7 / 56 Version 05, 25.07.2019